Gas Safe No. 59324107460 080131

Gas Safe Registered: No. 593241Mon–Fri 8:00am–6:30pm · Sat 8:30am–12:00pm

chris@csghp.com07460 080131

HomeAbout
- About Us
- Reviews

Services
- Heating Engineer
- Boiler Installation
- Boiler Service
- Boiler Repair
- Plumbing
- Central Heating Installation
- Landlord Certificates
- Radiator Installation
- Power FlushingView all services

Areas
- Nottingham
- Derby
- Mansfield
- Hucknall
- Ilkeston
- Beeston
- Long Eaton
- Matlock
- ChesterfieldView all areas

Our WorkContact07460 080131Request a Free Estimate

- Home
- Areas
- MatlockWhere We Work · Matlock

# Heating Engineerin MatlockDerbyshire Dales Homes Kept Warm
Stone-built, exposed and often hard-water properties need heating specified for the house they are in, surveyed properly, quoted in writing, installed by one Gas Safe registered engineer.

Request a Free EstimateCall 07460 080131

Gas Safe No. 593241 · Domestic work only · Mon–Fri 8:00am–6:30pm · Sat 8:30am–12:00pm

Gas Safe registered: No. 593241

23 years in the trade since 2003

Free fixed-price installation quotes

Servicing from £75 + VAT

12-month workmanship guarantee on most work

Local Coverage

## Boiler and heating work across Matlock and the Derbyshire Dales
About 20 miles from Underwood, up through the A38 and A615 into the Derwent valley.

Matlock sits in the Derwent valley on the edge of the Peak District, roughly 20 miles from our Underwood base. We cover the town along with Matlock Bath, Darley Dale, Tansley, Wirksworth and Cromford: the villages along the valley and up the surrounding hillsides.

The property here is different from our valley-floor Nottinghamshire work. Much of it is gritstone or limestone, solid-walled, sometimes listed or in a conservation area, with thick walls, deep window reveals and a lot of exposure to wind and weather. Heating sized for a modern insulated house will not keep these properties comfortable, which is why heat loss is calculated room by room rather than assumed.

Matlock is also higher and colder than the areas closer to Nottingham. Winter here is longer and harder on a system: condensate freezes more readily, older systems struggle to hold temperature on the worst nights, and hard water from the limestone geology scales combi heat exchangers faster. All of that is factored into what we specify.

Being further out, we schedule Matlock work to planned slots for services, surveys and installations, with breakdowns given a same or next-day visit wherever the diary allows during our opening hours, Monday to Friday 8:00am to 6:30pm and Saturday 8:30am to 12:00pm. Work is domestic only, and landlord CP12 certificates are from £85 + VAT with a service.

### What that means for Matlock
Dales coverageMatlock, Matlock Bath, Darley Dale, Tansley, Wirksworth and Cromford.

Stone-built and period propertySolid walls and high exposure mean radiator and boiler sizing has to be calculated, not guessed.

Hard-water awareLimestone geology scales combi heat exchangers, we check hot water performance at every service.

Careful in sensitive homesWe have worked in listed property before, including a Grade II listed boiler replacement carried out with real care.

Services

## What we do in Matlock
Every service below is available across Matlock and the surrounding villages. Prices are quoted before work starts, and all work is domestic only.

### Heating Engineer in Matlock
Whole-system heating work for Matlock and Derwent valley homes, including older stone-built property.

Read more

### Boiler Installation in Matlock
Baxi approved installer: free survey, fixed written quote and a 5, 7 or 10 year manufacturer warranty.

Read more

### Boiler Service in Matlock
From £75 + VAT, booked into a planned Matlock slot, with hot water performance checked for scale.

Read more

### Boiler Repair in Matlock
£80 + VAT diagnostic visit including the first hour, with further work quoted before we continue.

Read more

### Plumbing in Matlock
Domestic plumbing and unvented hot water cylinders, G3 qualified and WaterSafe registered.

Read more

### Central Heating Installation in Matlock
Systems sized for solid-walled, exposed Dales properties rather than to a rule of thumb.

Read more

### Landlord Certificates in Matlock
CP12 gas safety certificates from £85 + VAT with a service for Matlock rental property.

Read more

### Radiator Installation in Matlock
Correctly sized radiators for cold, high-heat-loss rooms, then balanced across the system.

Read more

### Power Flushing in Matlock
Clears sludge from long-serving Dales systems so radiators reach full output again.

Read more

Why Us

## Why Matlock homeowners and landlords call us
Every claim on this page comes from our own accreditations, insurance and published prices: nothing invented, nothing exaggerated.

### Sizing done by calculation
Solid-wall stone property loses heat far faster than a modern build. We calculate heat loss room by room before specifying a boiler output or radiator size.

### Careful work in period homes
One of our documented customers had a boiler replaced in a Grade II listed home and described the work as clean, careful and professional throughout.

### 23 years in the trade since 2003
Chris Smith trained at British Gas, worked for E.ON and Vaillant, and founded CSGHP Ltd in 2019.

### Accredited and insured
Gas Safe No. 593241, Baxi approved installer, Vaillant registered installer, ACS, City &amp; Guilds NVQ Level 3, G3, BPEC, APHC and WaterSafe, with £2m public liability cover.

Local Property Issues

## Why Dales properties are harder on a heating system
Altitude, exposure, stone construction and hard water combine to shorten the life of anything under-specified.

### Solid stone walls and high heat loss
Gritstone and limestone walls have no cavity to insulate and hold cold for a long time. A room in Matlock can need considerably more radiator output than a same-sized room in a 1990s house, and getting that wrong is why so many Dales rooms never feel properly warm.

It also affects how the system should be run. Solid-wall houses respond slowly, so longer running periods at lower flow temperatures usually give better comfort and lower bills than short, hot bursts, provided the radiators are sized to allow it.

### Exposure, altitude and frozen condensate
Higher ground and open valley sides mean lower overnight temperatures and stronger wind chill than we see in Nottingham. Boilers with external condensate runs freeze and lock out, typically in the early hours of the coldest night of the year.

Where at all possible we route condensate internally. Where it must run outside, it is upsized and properly insulated. It is a small detail at installation that removes a recurring winter emergency.

### Hard water and limescale
Water in limestone country is hard, and that shows up first in combi boilers, where the plate heat exchanger scales and hot water flow gradually falls away. Left long enough the exchanger is beyond cleaning and needs replacing.

Scale also affects unvented cylinders and shower fittings. We check hot water performance at every service, so a scaling exchanger gets identified while it is still a service issue rather than a replacement.

### Listed and conservation-area constraints
In listed and conservation-area property, flue positions, pipe routes and external terminations are constrained, and the work has to be neat because there is nowhere to hide it. That gets established at survey, not discovered on installation day.

Interior work needs the same care: lifting boards in older properties, protecting stone floors and original features, and keeping pipe runs discreet. It takes longer, and we price for doing it properly rather than quickly.

Gas Safe Registered

Baxi Approved Installer

APHC Licensed Member

Our Process

## How a Matlock job runs, step by step
The same sequence on every visit, so you always know what happens next and what it costs before it happens.

- 1
### Call or send the form
Tell us the postcode, the property and the symptom. We confirm what the visit costs before we set off.

- 2
### Inspection on site
Boiler, controls, radiators, cylinder and system water all checked: not just the part that stopped.

- 3
### Diagnosis and written price
You get the cause, the options and a price. Repairs beyond the first hour are quoted before we carry on.

- 4
### The work carried out
Dust sheets down, gas work signed off by a Gas Safe registered engineer, and the area left clean.

- 5
### Testing and commissioning
Gas rate and combustion checked, system rebalanced, controls set up and hot water performance verified.

- 6
### Handover and guarantee
We show you what was done, leave the paperwork, and back most work with a 12-month workmanship guarantee.

Questions

## Matlock, your questions answered
Anything not covered here, call 07460 080131 and ask Chris directly.

Do you serve Matlock?Yes. Matlock is one of our named service areas, around 20 miles from our Underwood base, and we also cover Matlock Bath, Darley Dale, Tansley, Wirksworth and Cromford.

How quickly can you get to Matlock?Services, surveys and installations are booked into planned slots. Breakdowns get a same or next-day visit wherever the diary allows, within our opening hours.

How much is a boiler repair in Matlock?£80 + VAT for the diagnostic visit including the first hour on site. Anything beyond that is quoted before we continue.

What does a boiler service cost in Matlock?From £75 + VAT, and it is what keeps a manufacturer warranty of 5, 7 or 10 years valid.

Can you work on a listed or period property?Yes. Flue routes, pipe runs and terminations are agreed at survey, and the work is carried out carefully, we have replaced a boiler in a Grade II listed home for a documented customer.

Is a new boiler quote free in Matlock?Yes: free, written and at a fixed price, with sizing calculated for the property's actual heat loss.

Why does my hot water flow keep dropping?In hard-water areas like Matlock it is usually limescale in a combi's plate heat exchanger. Caught early it can often be treated; left too long the exchanger needs replacing.

Do you provide landlord gas safety certificates in Matlock?Yes. CP12 certificates from £85 + VAT with a service, with remedial work estimated in writing beforehand.

Are emergency call-outs available in Matlock?Yes, for boiler breakdowns and gas faults, with a same or next-day response wherever possible during our opening hours. For a suspected gas escape, call 0800 111 999 first.

Do you take commercial work in the Dales?No. CSGHP Ltd works on domestic property only.

Nearby Areas

## We also cover these areas near Matlock

- Chesterfield
- Derby
- Mansfield
- Ilkeston
- NottinghamView all service areas

Find Us

## Based in Underwood, covering Matlock
See our heating engineer services, browse all services, or get in touch.

Next Step

## Book a Matlock survey or service
Tell us about the property, age, construction, current heating and what is not working. Dales homes need sizing done properly, and that starts with a free survey and a written fixed-price quote.

Call 07460 080131

- Gas Safe registered: No. 593241
- £2m public liability cover
- 12-month workmanship guarantee on most work

Gas Safe registered heating engineers for homes across Nottinghamshire and Derbyshire. Boiler installation, servicing, repair and central heating, domestic work only.

Gas Safe Register No. 593241Company No. 11826928

## Services

- Heating Engineer in Nottingham
- Boiler Installation in Nottingham
- Boiler Service in Nottingham
- Boiler Repair in Nottingham
- Plumbing in Nottingham
- Central Heating Installation in Nottingham
- Landlord Certificates in Nottingham
- Radiator Installation in Nottingham
- Power Flushing in Nottingham

## Service Areas

- Heating engineer in Nottingham
- Heating engineer in Derby
- Heating engineer in Mansfield
- Heating engineer in Hucknall
- Heating engineer in Ilkeston
- Heating engineer in Beeston
- Heating engineer in Long Eaton
- Heating engineer in Matlock
- Heating engineer in Chesterfield

## Contact
142 Main Rd, Underwood,Nottingham NG16 5GN

07460 080131

chris@csghp.com

Monday8:00am – 6:30pm

Tuesday8:00am – 6:30pm

Wednesday8:00am – 6:30pm

Thursday8:00am – 6:30pm

Friday8:00am – 6:30pm

Saturday8:30am – 12:00pm

SundayClosed

© 2026 CSGHP Ltd (CS Gas Heating &amp; Plumbing). All rights reserved.

Privacy PolicyTerms &amp; ConditionsCookie PolicyRegistered in England &amp; Wales, Company No. 11826928

Call NowFree Estimate

We use essential cookies to run this site, plus optional cookies for our live chat and enquiry form. See our Cookie Policy.

AcceptReject